- One to one key copy
- Each key password alone save
- Continuous repetitive copy,use one million times
- Privacy is strong
How to Program:
1. Press the One and Two buttons until the LED flashes - it takes around 3 seconds.
2. Place the cloner remote and the original remote close together/side by side so that they are touching.
3. Press a button on your original remote in the same time and one of the buttons on the clone remote and hold until the LED on the clone remote flashes steadily.
(The Blue LED will first flash 3 times quickly, then stops for a second, then flashes steadily for successful cloning).
4. Now programming is successful! If you want to program more buttons just repeat steps 2 - 4. It's that easy! To reset the remote simply start again with step 1.
Working voltage: DC12V (27A battery a including)
Operating Current: ≤ 8mA
Working frequency: 433.92MHz
Modulation Mode: ASK (AM)
The transmission power: ≤ 100mW
Emission Distance: 50 to 100 m (proof)
The encoding type: self Copy
The working temperature: -10 ° C to +50 ° C
Works with the following remote control IC modules (please check your original remote control before ordering), remotes also should be Fixed code or Learning code.
Uses: garage doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control products